Reach ranges, access aisles, cable management, screens, payment and signage: what the US Access Board recommends, where the federal rule stands, and how a commercial site host can build charging that works for every driver.
Accessible EV charging takes more than a painted stripe and a sign. A driver who uses a wheelchair has to get out of the car, reach the charger, lift the connector, read the screen, pay and plug in, often alone. Each of those steps is a design decision a site host makes before the concrete is poured.
This guide covers what the US Access Board recommends, where the federal rules stand, and how to make a commercial site work for every driver. It is general information, not legal or engineering advice: confirm requirements with your designer and local building department.
In July 2022 the US Access Board, working with the Department of Transportation, published Design Recommendations for Accessible Electric Vehicle Charging Stations. The document separates two kinds of guidance. Where it says "must", it is describing provisions of the existing ADA, ABA and Section 508 Standards that already apply to charging stations, such as accessible routes, clear floor space, reach ranges and operable parts. Where it says "should" or "recommends", it is technical assistance and not legally binding.
On September 3, 2024 the Board published a notice of proposed rulemaking to add EV-specific requirements to the ADA and ABA accessibility guidelines, with public comments due November 4, 2024. At the time of writing, the Board's EV charging page still describes that rule at the proposed stage. State and local codes can already go further: California, for example, has accessibility regulations that set a minimum number of accessible charging stations for public and shared use.
The current ADA Standards do not say how many accessible EV charging spaces a site needs. The 2022 technical assistance recommends designing at least two charging spaces with accessible mobility features, and providing accessible communication features and operable parts at every charger. If a state or local code sets a minimum, at least that number applies.
The 2024 proposed rule would replace that recommendation with a table. Its main option scales like this:
| EV charging spaces at the station | Proposed minimum accessible spaces |
|---|---|
| 1 to 25 | 1 |
| 26 to 50 | 2 |
| 51 to 75 | 3 |
| 76 to 100 | 4 |
| 101 to 150 | 5 |
| 151 to 200 | 6 |
| 201 to 300 | 7 |
| 301 to 400 | 8 |
| 401 to 500 | 9 |
| 501 to 1000 | 2 percent of total |
| 1001 and over | 20, plus 1 for each 100, or fraction thereof, over 1000 |
Two details matter for planning. Under the proposal, accessible EV charging spaces would not count toward the accessible car and van parking a lot already has to provide. And the technical assistance does not recommend marking accessible charging spaces with the International Symbol of Accessibility unless state or local code requires it. It encourages "use last" signs instead, which ask other drivers to pick another charger first so the accessible space stays open longer.
A driver needs room to get out, move around the vehicle and reach the inlet, which can sit on the front, side or rear of the car. The technical assistance recommends:
The recommendations prefer bollards to wheel stops, because a wheel stop sits in the area where a wheelchair user needs to turn. Keep bollards out of the clear floor space and the access aisle.
Everything a driver touches is an operable part: the connector, the card reader, the screen and any buttons, including the emergency stop. The technical assistance recommends:
The exception that lets gas pump nozzles sit higher does not carry over: the Access Board recommends against using it for EV chargers, and the 2024 proposal does not extend it to connectors. Before you set a pad, ask the charger vendor for the mounted height of the connector holster, the screen and the card reader on the exact model and mounting option you plan to buy, and check them against these numbers.
DC fast cables are heavy, and a cable across the access aisle is a barrier and a trip hazard. The technical assistance says cables must not block accessible routes, whether stored or connected, and recommends that heavier DC fast cables reach a vehicle positioned at least 60 inches (5 feet) away. The 2024 proposal would require a cable management system on any charger cable that weighs more than 5 pounds.
Overhead cable systems must not become protruding objects, and cable management has to stay in good working order, so treat it as a maintenance item too. Connectors with a release button in the handle, or a strap or loop, can be easier to use.
The Access Board recommends communication access at every charger, not only the accessible space. Drawing largely on Section 508, it suggests:
Every extra payment step is a barrier. On sites run on eMÖTEN CMS, drivers can scan the QR code on the charger and pay by card, Google Pay or Apple Pay with no app download and no account, tap or insert a card at a payment terminal on hardware that has one, use an RFID card, or charge against prepaid credit in the eMÖTEN app. They see the price before charging starts and get a receipt every time. Whatever platform you choose, ask for accessibility conformance documentation for its app and payment pages.
The technical assistance recommends against "van accessible" signs at charging spaces, because wheelchair-accessible electric vans are still in development and their inlet locations are not yet settled. It encourages "use last" signs, with the bottom edge of the example sign at least 60 inches above the ground, and notes that no MUTCD standard for that sign exists yet. Online, it recommends that charging networks report specific features, such as which side the access aisle is on, a long cable, or reserved status, rather than a generic "accessible" label.
An accessible space that is out of service is not accessible. Three habits help.
The full feature set is on the eMÖTEN CMS page, and our site assessment checklist covers accessibility alongside the electrical checks.
Canadian EV-specific accessibility standards are still being developed, according to BCIT's Charging Forward program, so designers often use the US Access Board guidance as a reference. CSA/ASC B651:23, Accessible Design for the Built Environment, is the primary Canadian standard for accessible design, and CSA/ASC B651.2 covers self-service interactive devices, the category that includes charger screens and payment interfaces. Provincial codes and accessibility laws apply on top, and some municipalities publish their own guidance: the City of Brampton issued accessible design guidelines and a "use last" policy for its own new chargers in September 2024. Confirm the rules with the province and municipality.
The hardware is on our Commercial Level 2 and DC Fast Chargers pages. Every MÖTEN charger is ETL certified with a 2-year manufacturer warranty, and you can request a quote with your site plan attached.
Parts of the existing ADA Standards, such as accessible routes, clear floor space, reach ranges and operable parts, apply to charging stations today. EV-specific scoping and technical requirements were published by the US Access Board as a proposed rule in September 2024, and state or local codes can set their own minimums.
Where no code sets a number, the Access Board's 2022 technical assistance recommends at least two charging spaces with accessible mobility features. Its 2024 proposed rule would require one accessible space at a station with 1 to 25 charging spaces, rising with the size of the station.
The Access Board recommends a vehicle space at least 132 inches (11 feet) wide and 240 inches (20 feet) long, with an access aisle at least 60 inches (5 feet) wide along the full length of the space.
The Access Board recommends placing operable parts, including the connector, card reader, screen controls and emergency stop, no higher than 48 inches within an unobstructed side reach, and above the 15-inch minimum.
Send us your site plan and the number of charging spaces you want. We will go through charger placement, mounting and the payment path with you, and show how eMÖTEN Power fits the chargers on the service you already have.