Most of the time spent on a charging project goes into approvals, not hardware. Here is what a typical project needs, and how MÖTEN Install helps you through it.
Every site is different. The site survey confirms exactly what applies to yours.
Confirm your sanctioned load can carry the chargers. If not, a load extension or new connection is applied for with your DISCO (K-Electric, LESCO, IESCO and others).
Apartment towers, malls and housing societies usually need written consent from the building management or society before work starts.
Cabling, protection and earthing by a qualified electrical contractor, tested and commissioned before use.
Public and paid stations may have additional registration and safety requirements. We confirm the current rules for your site.
MÖTEN Install checks the supply, distribution board and cable route.
We size the chargers to your load, or use eMÖTEN Power or a battery-buffered cluster to avoid an upgrade.
We prepare the technical details your DISCO and building management ask for.
We install, test and put every charger live on eMÖTEN.
A home charger on an existing three-phase supply usually needs no new connection, but the supply must be able to carry the charger. If the charger needs more load than your sanctioned load, your DISCO must approve a load extension or a new connection before the charger is energised. Our site survey tells you which applies.
The electrical work should be done by a qualified electrical contractor. MÖTEN Install surveys, installs, tests and commissions every charger it fits.
We are not aware of national charger rebates in Pakistan at present. Ask us about current policies when you request a quote; we check them for your site and city.
Requirements for public and commercial charging stations depend on the site, the supply and current federal and provincial rules. We confirm the current requirements for your site during the survey and help you prepare the paperwork.
Book a site survey and we will tell you exactly which approvals apply.