62 answers to the EV charging questions Canadian buyers, installers and site owners ask most: choosing chargers, installation, the eMÖTEN CMS, rebates by province, GST/HST, winter, day-to-day operations and the technical details. Plain answers; every one assumes you have work to do.
Picking the right charger, costs, sizing, decisions
It depends on dwell time. If vehicles park for 4+ hours (workplace, hotel, multifamily), you want Level 2, typically 7.7–19.2 kW. If vehicles park 20–60 minutes (corridor, retail, fleet quick-turn), you want DC fast, 50 kW or higher. If your service entrance can't support DC fast and the utility upgrade is too slow, XEYAR battery-buffered charging lets a 100 A service drive up to 720 kW. If your site doesn't fit cleanly into one of those buckets, request a quote and we'll size it with you.
Match charger speed to dwell time. Level 2 adds roughly 25 to 130 km of range per hour and is right when vehicles dwell 4+ hours. DC fast (what many Canadians call Level 3) adds roughly 160 to 480 km in 30 minutes and is right when vehicles dwell under an hour. Buying DC fast for a workplace where cars sit 8 hours wastes capital; buying Level 2 for a highway stop wastes drivers’ time. Read our deep-dive on choosing chargers by dwell time.
Start with three numbers: how many EV drivers will use the site daily, average dwell time per vehicle, and how many hours per day the chargers can be in use. As a rough rule for workplace Level 2, one port for every 4 EV-driving employees works for typical 8-hour shifts. For public DC fast, plan one port for every 25–40 daily sessions at 30-minute average sessions. Send us your site profile when you request a quote and we'll size it specifically.
Hardware prices are published in CAD on each product page, before tax. Installation cost depends on the site, so we don’t publish one number: the big drivers are spare panel capacity, the distance from the panel to the charger, trenching or coring through concrete, permit and inspection fees in your province, and whether the utility has to upgrade the service. For DC fast, utility service and civil work are usually the largest lines, and battery-buffered charging can avoid the service upgrade. Try the EV charging station ROI calculator, then request a quote for your site.
Total cost of ownership is what matters, not the sticker. For example, a C$1,500 Level 2 charger with a C$30/month network fee costs C$5,100 over 10 years. Cheaper hardware also tends to have less mature firmware and limited OCPP compatibility. On MÖTEN chargers the eMÖTEN CMS subscription is $0 per month for the life of the charger, so the software line in your TCO is zero unless you collect payment from drivers. See CMS pricing for the plans that collect driver payments.
For new commercial Level 2, NACS (SAE J3400) is the safer long-term bet: most major automakers committed to it for North American vehicles starting in the 2024–2026 model years. Some operators hedge with dual-connector stations (one NACS, one J1772). For DC fast, both CCS1 and NACS are in use today; the right answer depends on which vehicles you serve. Each MÖTEN product page lists the connector options for that model.
Buying makes sense when you have capital, want low operating costs, and want full control. Financing makes sense when capital is constrained or you’d rather spread the cost. Either way, compare 10-year cost, not monthly payment: some lease deals bundle software and processing fees into the monthly rate, so read the contract carefully. Ask our sales team whether financing is available for your project in Canada.
Every MÖTEN product carries a 2-year manufacturer warranty, in addition to your statutory rights. You can extend it to 5 years (2+3) or 10 years (2+8), sold separately. The XEYAR battery carries a 10-year warranty. Read the warranty page for full terms.
Often, yes. Accessible parking and charging rules come from your provincial building code and municipal bylaws, and many projects, especially funded ones, reference CSA B651 (accessible design for the built environment). Accessibility is not just the charger: it covers parking space size, the route to the charger, the reach height of the connector, and signage. The number of accessible spaces depends on how many ports you install and on local rules. We plan accessible placement during site design.
Level 2 chargers, home chargers, pedestals and accessories ship in 3 to 7 business days. DC fast chargers and battery-buffered clusters are built to order and ship in 60 to 90 days. Shipping is free anywhere in Canada, with no duties or customs fees at delivery.
Prices are in Canadian dollars and shown before tax. GST or HST is added at checkout based on the province you ship to. There are no duties or customs fees at delivery.
Permits, electrical work, timelines, site conditions
Residential Level 2: 2–6 hours on install day, 1–3 weeks in total including the permit. Commercial Level 2 (single port): 1–2 days on site, 4–8 weeks in total including permits and utility coordination. DC fast (single port): 1–3 weeks on site, often 4–9 months in total when a utility service upgrade is needed. Battery-buffered charging can shorten that because it usually avoids the service upgrade.
Yes, almost always. In Canada, a hardwired EV charger or a new circuit needs an electrical permit and inspection under the Canadian Electrical Code as adopted by your province: ESA in Ontario, Technical Safety BC in British Columbia, and RBQ rules in Quebec. A plug-in charger on an existing 14-50R outlet may not need another permit, but the original outlet did. Our EV charger installation service handles permits through the licensed electricians who do the installation; if you’re using your own electrician, confirm they take out the permit.
Use a licensed electrician. Hardwired installs and new circuits need one in practice everywhere in Canada: an ESA Licensed Electrical Contractor in Ontario, a licensed electrical contractor under Technical Safety BC in British Columbia, and an RBQ-licensed electrical contractor in Quebec. A plug-in charger can go on an existing outlet that meets code. A bad install can void the warranty and create insurance problems.
Sometimes. Wall-mounted chargers near an existing panel rarely need trenching. Pedestal chargers in parking lots almost always do: conduit from the building service to the pedestal pad, buried below the frost line. Trenching is the single biggest install cost variable, and long runs across asphalt or concrete can be the largest line in the quote. We map conduit paths during site assessment to give you an accurate quote.
Maybe. Existing peak load plus new charger load must fit under the service entrance rating. A 200 A home service can often support one Level 2 charger without an upgrade, and an EV energy management system (EVEMS) under CEC Rule 8-106 can help a smaller service. A 400 A commercial service can typically support 4 to 8 Level 2 ports or one 50 kW DC fast charger. DC fast at 150 kW and up usually needs a three-phase service (often 600 V in Canada) with substantial capacity. Battery buffered EV chargers exist specifically to skip this upgrade.
It depends on the site, so we don’t publish a single figure. The cheapest install is one where the panel has spare capacity, the charger sits close to the panel, and no concrete needs cutting. Costs rise with long wire runs, trenching, panel or service upgrades, and permit and inspection fees, which vary by province and municipality. Request a quote for a real number in CAD.
Yes, with load management. Without it, each charger needs its own circuit sized for its full load under CEC Section 86. CEC Rule 8-106 lets an EVEMS (certified to CSA C22.2 No. 343) reduce the calculated load, so several chargers can share capacity. eMÖTEN CMS also provides software load management on MÖTEN chargers; your electrician confirms how it fits the load calculation. This is the standard approach for condo, strata and workplace sites.
Yes. MÖTEN chargers carry an IP rating of IP65 or IP67 depending on model and are rated to operate from -30 to +50 °C; XEYAR battery-buffered clusters are rated from -40 to +65 °C. Mount the charger high enough to clear snowbanks and use a holster or cable management so the 7.6 m (25 ft) cable stays off the ground. For coastal or very cold sites, tell us when you request a quote so we can recommend the right model and mounting.
Usually, yes, with the building’s approval. In Ontario, a condo owner applies to the board in writing, the board has 60 days to respond and can refuse only on specific grounds, and the owner usually pays (Ontario Regulation 48/01). In British Columbia, recent Strata Property Act changes make EV charging easier to approve. In Quebec, start with the syndicate of co-owners. For whole-building projects, load management or a battery-buffered cluster can avoid a service upgrade.
Yes. Trenching during a paving project is incremental; trenching afterward means cutting new asphalt. Spec EV-ready conduit (empty conduit with pull strings and junction boxes at planned charger locations) during paving. The conduit is cheap and the after-the-fact trenching is not, so this saves real money even if chargers go in two years later.
Commissioning is the checklist before going live: the inspection passes, the charger connects to the CMS over OCPP, test sessions complete with billing flowing correctly, signage is in place, and accessibility is verified where required. MÖTEN chargers typically connect and test in a few hours. If your own electrician installs, our support team helps remotely, every day from 7 a.m. to midnight ET.
eMÖTEN CMS, OCPP, payments, settlement, data
eMÖTEN CMS is our charger management system: remote monitoring, session control, pricing, driver payments, settlement and payouts to site owners, load management and reporting. The subscription is $0 per month for the life of every MÖTEN charger, and other OCPP chargers can join on paid plans. See the EV charging management software page.
The software cost is built into the price of MÖTEN hardware, so there is no CMS subscription on MÖTEN chargers. Plans that collect payment from drivers carry a per-session fee, and card processing is recovered at exact cost with no mark-up. The numbers are on CMS pricing.
Drivers pay in the eMÖTEN app, with an RFID card, with a credit code, or by scanning the QR code with no app at all. We are the merchant of record, so we handle card processing, chargebacks and receipts. Card fees are recovered at the exact amount charged on each payment, with no mark-up.
MÖTEN chargers and eMÖTEN CMS run OCPP 1.6, 2.0.1 ready. Read our deep-dive: OCPP 1.6 vs 2.0.1: what changes.
Yes. Any charger that speaks OCPP 1.6J or later with charging profile support can run on eMÖTEN. Each charger model is validated during commissioning before it goes live, and a one-time activation per port covers brand certification, payment integration and onboarding. See CMS pricing.
Yes: per kWh, per minute, flat fee, time-of-use windows, and combinations of these. eMÖTEN supports time, session and kWh pricing; kWh billing in Canada follows Measurement Canada rules. You can add idle fees after a session ends to clear the port. Staff, tenants and your own vehicles can be registered for internal use; their sessions are never billed and never appear as sales.
Yes. Site owners get their own login with their sites, sessions and statements: a line for every session with energy delivered, what the driver paid and what the owner earned.
Monthly. Driver payments are held in Stripe, not in our bank account. When the month closes, each site owner is paid from Stripe into their own Stripe Connect account and withdraws to their bank whenever they choose. eMÖTEN issues a self-billed statement on the site owner's behalf, so they never have to invoice us.
Yes, the eMÖTEN app, on iOS and Android. Drivers can find chargers, start and stop sessions, pay and see their history. Drivers who don't want an app can pay with an RFID card, a credit code or the QR code on the charger.
Yes. Each site owner receives a line-by-line statement for the period, carrying their own GST/HST registration number. Every line ties to a specific driver payment that has cleared, so a bookkeeper can check it by hand.
Provincial, utility and federal programs
It depends on the province. Quebec’s Écorecharge program and British Columbia’s CleanBC programs (with BC Hydro) offer charger rebates for homes, multi-unit buildings and workplaces. Ontario has no provincial charger rebate. The federal ZEVIP program is closed to new applications. Some utilities and municipalities add their own programs. See EV charger rebates by province, with amounts from official program pages as of November 2026.
Sometimes. Some programs reduce their payment by other funding on the same cost, or cap total public funding at a share of the project cost. Read each program’s terms, or have us help you map them.
Often. Quebec’s Écorecharge works from a list of eligible chargers. British Columbia’s CleanBC home rebate asks for a J1772 or J3400 connector and a recognized Canadian safety mark such as cETL or CSA, and its multi-unit and workplace rebates require networked chargers. MÖTEN Level 2 chargers are cETLus certified to UL 2594 and CSA C22.2 No. 280. Our listing with Écorecharge and CleanBC is in progress, so contact us before you buy if you plan to apply.
Start with your provincial program (Écorecharge in Quebec, CleanBC in British Columbia), then check your electric utility and your municipality: some add their own rebates or EV rates. Natural Resources Canada lists federal programs. Our incentives page tracks the main programs by province.
Almost always you, the site host. Programs pay the owner-operator, so the application is in your name. We supply the documents you need: charger model and certification details, equipment invoices and spec sheets.
Most charger rebates pay after installation, once you submit invoices and proof of installation; British Columbia’s home rebate, for example, is claimed after purchase. Processing times vary by program. Don’t budget assuming rebate money arrives before you pay the contractor.
Some programs pay more for certain applicants or sites: British Columbia’s CleanBC home rebate, for example, is higher for Indigenous applicants. Send us your address and we’ll check the programs we know about.
Yes, in some provinces, and they are often more generous than home rebates. Quebec’s Écorecharge has a stream for chargers in multi-unit buildings, and British Columbia’s CleanBC program funds EV-ready plans, infrastructure and chargers in multi-unit residential buildings, with pre-approval required and networked or EVEMS-managed chargers. Our incentives page has the details by province.
No, and you should be skeptical of anyone who does. Eligibility depends on program rules, your situation, application timing, available funds, and sometimes lottery queues for over-subscribed programs. We can confirm whether the equipment meets the program's equipment rules, but final approval is the program's call.
No. All ZEVIP streams are closed to new applications, and no new intake has been announced. If a new federal intake opens, we will update our incentives page.
Day-to-day running, support, warranty, uptime, maintenance
Less than people expect. Quarterly visual inspection (cable wear, screen damage, signage), annual electrical inspection per local code, and connector cleaning at heavy-traffic sites. Firmware updates arrive over the air. Most issues are vandalism or vehicles backing into pedestals, which is what insurance is for.
Our support team is available every day, 7 a.m. to midnight Eastern, at support@evfc.com or +1 (888) 528-7582. Charger monitoring is continuous, so faults are logged even outside support hours.
MÖTEN deployments are backed by a 97% Uptime SLA; ask for the SLA terms with your quote. The biggest uptime risks are network connectivity, payment outages and physical damage, and continuous remote monitoring catches most issues early.
The charger reports the fault to eMÖTEN CMS automatically. Our support team starts with remote diagnosis and restart, which resolves many issues. If a part is needed under warranty, we ship it, and a site visit is coordinated with your installer.
Charging continues. Session records are stored on the charger and sync to the CMS when the connection returns, so no billing data is lost. In shared-capacity mode the charging limit is also stored on each charger, so the site keeps its power ceiling even if the building's internet drops.
We are the merchant of record, so card disputes and chargebacks come to us, not to the site owner. Every session carries timestamps, energy delivered and payment status, which usually settles a dispute quickly.
File an insurance claim; commercial property insurance typically covers EV chargers as fixtures. We supply replacement parts and pricing for the claim. Cable damage is the most common case. Bollards protect pedestals from vehicle impact, and cameras deter cable theft.
Yes. Charger firmware is updated over the air through the CMS connection, and the CMS itself runs in the cloud, so there is nothing to install on site.
Your eMÖTEN login shows every session by site: energy delivered, what the driver paid, what the owner earned, and fault history.
Commercial Level 2 hardware commonly runs 10 years or more with cable replacement; DC fast cabinets are often planned for 8–12 years, with cables and connectors replaced along the way. On MÖTEN products, the manufacturer warranty is 2 years (extendable to 5 or 10), and the XEYAR battery is warranted for 10 years.
Hardware specifics, networking, protocols, compatibility
MÖTEN Level 2 models deliver up to 80 A (19.2 kW). DC fast power levels are listed on the DC fast charger page. Real-world speed depends on the power the vehicle accepts and its state of charge; vehicles slow down above about 80% by design.
EV chargers are continuous loads, so under the Canadian Electrical Code the breaker is sized at 125% of the charger’s current: 32 A needs a 40 A breaker, 40 A needs 50 A, 48 A needs 60 A, and an 80 A charger needs a 100 A breaker. Your electrician confirms wire size and local requirements.
Connectivity options vary by model and are listed on each spec sheet. For outdoor commercial sites, a wired or cellular connection is usually more reliable than Wi-Fi, because Wi-Fi range is shorter outdoors than buyers expect.
The XEYAR battery sits between the grid and the chargers. The grid recharges the battery within the service entrance rating, and the battery feeds the chargers at much higher power, up to 720 kW on a 100 A service. Drivers see normal fast charging; the service entrance never sees the burst load. The architecture is Patent Pending · USPTO + CIPO. Read the deep-dive: battery-buffered clusters that skip the panel upgrade.
With the eMÖTEN app, an RFID card, a credit code, or by scanning the QR code on the charger with no app at all.
V2G and V2H need bidirectional hardware, vehicle support and a utility interconnection agreement. If you're planning a V2G or V2H project, contact us with the details and we'll tell you what fits.
MÖTEN Level 2 chargers are cETLus certified to UL 2594 and CSA C22.2 No. 280, and DC fast chargers are cETLus certified to UL 2202. They follow IEC 61851 and carry an IP65 or IP67 rating depending on model. ENERGY STAR applies on select models (DORADO, LYNX, PHOENIX). Certificates are available on request, and each product page and spec sheet lists the certifications for that model.
Yes. MÖTEN chargers run OCPP 1.6, 2.0.1 ready, an open standard, so you can point the charger at any compatible central system through its WebSocket URL. The hardware is yours and so is the back-office choice. The eMÖTEN CMS subscription is free for the life of every MÖTEN charger if you want it.
Almost always. Small single-phase DC units exist, but anything 50 kW+ is three-phase. If your site is single-phase only, the options are a utility upgrade to three-phase, high-power Level 2 instead of DC fast, or battery-buffered charging sized to your existing service.
No questions match the current filter and search.
Cross-references to terminology, engineering deep-dives, and downloadable specs.
138 EV charging terms in plain English, from J1772 and NACS to OCPP, CEC Section 86, EVEMS and GST/HST. A–Z indexed and searchable.
Browse the glossaryField-tested writing on EV charging hardware, software, standards, and deployment from the MÖTEN evfc engineering team.
Read the blogDownloadable datasheets for every MÖTEN charger and accessory: specs, certifications, dimensions, electrical requirements.
Browse spec sheetsIf your question isn't above, we'd rather hear it. Most go to engineering or sales same-day. The good ones become FAQ entries (we ask before publishing).
Or email sales@evfc.com · call (888) 528-7582
FAQs cover patterns, but most projects need someone who can fit the patterns to your specific site. Send us your details and we'll walk through it at no cost.